1 pvc processing aids DLP Series
2 type:acrylic
3 Particle size (40 mesh):>=98%
4 volatiles content(%):<=1.5
PVC Processing Aids DLP Series
1 Product Description
DLP series product is a general PVC processing aid based on emulsion polymerization technology. DLP series can be used in rigid PVC formulations to improve melt flowing,PVC gelation ability and surface quality. It has been widely used in the molding of various PVC products.
2 Performance
Accelerate PVC fusion rate in low temperature, increase cohesion and homogeneity.
Improve PVC rheological property and PVC resin plasticizing. Excellent clarity and surface quality for end-use products, superior fusion promotion for rigid and soft PVC. Increase output rates and improve production efficiency.
3 Typical P hysical Properties
Index
DLP-201
DLP-21
DLP-401
DLP-60
DLP-80
DLP-90
DLP-100
DLP-200
Appearance
White free flowing powder
Particle size (40 mesh passing percentage %)
≥98 % passing
Volatiles Content (%)
≤1.5
Viscosity (η)
3.0-3.5
3.5-4.5
3.5-4.5
6.0-7.5
7.5-8.5
10.5-11.5
9.5-10.5
11.0-12.0
4 Product Category and Properties
Category and Properties
Product
Promote speed
Product
Melt strength
Product
Rheological property
Product
Dispersivity
DLP-200
slow
fast
DLP-201
Low
high
DLP-200
Bad
good
DLP-200
bad
good
DLP-90
DLP-21
DLP-90DLP-90
DLP-401
DLP-60
DLP-60
DLP-60
DLP-60
DLP-80
DLP-80
DLP-80
DLP-80
DLP-100
DLP-90
DLP-100
DLP-100
DLP-201
DLP-100
DLP-201
DLP-201
DLP-21
DLP-200
DLP-21
DLP-21
DLP-401
DLP-401
DLP-401
5 Application
The customers may choose suitable ACR type and the dosage according to different type of product’s features, their needs, the directions for the products and the features of the facilities. If you put forward the specific request, we can recommend you the suitable type and the dosage through experiments.
Sunday, September 4, 2011
PTFE SHEET
1.Great thermostability and chemistry corrosion resistance
2.Great electricity performance
Description:
PTFE resin molded sheet is manufactured by molding with PTFE granular resin.
APPLICATION:
Lining Bearing pads, seals, and electrical insulation
length×width(mmXmm)
Thickness(mm)
Tolerance
150×150
1.0~30
±0.30~±0.50
250×250
1.5~30
±0.30~±0.50
300×300
1.5~30
±0.30~±0.50
450×450
1.5~30
±0.30~±0.50
600×600
2~30
±0.30~±0.50
800×800
2~30
±0.30~±0.50
1000×1000
3~30
±0.30~±0.50
1200×1200
3~30
±0.30~±0.50
1000 ×2000
5~35
±0.30~±0.60
TECHNICAL DATA:
Te chnical data
unit
Result
Apparent density
g/cm3
2.10~2.30
Tensile strength(min)
MPa
15.0
Ultimate elongation(min)
%
150
Dielecric strength(min)
Kv/mm
10
ADVANTAGES:
1.Minimal Water Absorption
2.Excellent Machining
3.Acid and chemical resistant
4.Good Electrical insulation
5.High working temperatures
6.Low friction
2.Great electricity performance
Description:
PTFE resin molded sheet is manufactured by molding with PTFE granular resin.
APPLICATION:
Lining Bearing pads, seals, and electrical insulation
length×width(mmXmm)
Thickness(mm)
Tolerance
150×150
1.0~30
±0.30~±0.50
250×250
1.5~30
±0.30~±0.50
300×300
1.5~30
±0.30~±0.50
450×450
1.5~30
±0.30~±0.50
600×600
2~30
±0.30~±0.50
800×800
2~30
±0.30~±0.50
1000×1000
3~30
±0.30~±0.50
1200×1200
3~30
±0.30~±0.50
1000 ×2000
5~35
±0.30~±0.60
TECHNICAL DATA:
Te chnical data
unit
Result
Apparent density
g/cm3
2.10~2.30
Tensile strength(min)
MPa
15.0
Ultimate elongation(min)
%
150
Dielecric strength(min)
Kv/mm
10
ADVANTAGES:
1.Minimal Water Absorption
2.Excellent Machining
3.Acid and chemical resistant
4.Good Electrical insulation
5.High working temperatures
6.Low friction
Tape primer for foam tape and EPDM,PP,TPE rubber
CNHYBOND 944
Tape primer/Promote adhesion/adhesion promote
Technical Data
Product Description
CNHYBOND 944 Tape primer
CNHYBOND 944
Tape primer/Promote adhesion/adhesion promote
Technical Data
Product Description
CNHYBOND 944 Tape primer
can be used to promote adhesion of double side adhesive(such as 3M VHB, 3M9080 , 3M9448 , Japan 5000NS, SONY T4000 , T4720 , TESE4940 etc.) to surfaces such polypropylene,EPDM,TPU,ABS,PET/PBT blends, concrete, wood, glass, metal and painted metal surfaces. IT is success replace : 3M K-500,3M K-520,3M 4298,,3M 94,3M4298
Typical Physical properties and Performance Characteristics
Note:
The following technical information and data should be considered representative or typical only and should not be used for specification purposes
S
olids: Approximately 5%-8%
Col or: clear light yellow
Flashpoint: -4°F(-20°C)
Net Weight: 780-800grams per liter
Viscosity: 40±5cps
Application Techniques
Surface preparation:
The bonding surface must be relatively clean and dry.Contaminated surfaces should be cleaned with a 50/50 Isopropyl Alcohol and water mixture,A clean lint-free cloth should be used.
Application
:Shake CNHYBOND 944 primer well before using:
Apply a thin uniform coating to the bonding surface using the minimum amount that will fully coat the surface, allow cnhybond 944 primer to dry thoroughly before applying tape. This is usually accomplished in 5 minutes at room temperature, Be sure the primed surface remains free from contaminants prior to applying the tape. Porous surfaces may require 2 application of CNHYBOND 944 primer for uniform coverage and good adhesion..
Allow first application of primer to dry before applying the second coat, CNHYBOND primer 944 may be applied with brush or swab, It can also be applied with a pressurized flow gun, knurled roller or other similar type of application equipment
Application Techniques
Surface preparation:
The bonding surface must be relatively clean and dry.Contaminated surfaces should be cleaned with a 50/50 Isopropyl Alcohol and water mixture,A clean lint-free cloth should be used.
Application
:Shake CNHYBOND 944 primer well before using:
Apply a thin uniform coating to the bonding surface using the minimum amount that will fully coat the surface, allow cnhybond 944 primer to dry thoroughly before applying tape. This is usually accomplished in 5 minutes at room temperature, Be sure the primed surface remains free from contaminants prior to applying the tape. Porous surfaces may require 2 application of CNHYBOND 944 primer for uniform coverage and good adhesion..
Allow first application of primer
to dry before applying the second coat, CNHYBOND primer 944 may be applied with brush or swab, It can also be applied with a pressurized flow gun, knurled roller or other similar type of application equipment
Tape primer/Promote adhesion/adhesion promote
Technical Data
Product Description
CNHYBOND 944 Tape primer
CNHYBOND 944
Tape primer/Promote adhesion/adhesion promote
Technical Data
Product Description
CNHYBOND 944 Tape primer
can be used to promote adhesion of double side adhesive(such as 3M VHB, 3M9080 , 3M9448 , Japan 5000NS, SONY T4000 , T4720 , TESE4940 etc.) to surfaces such polypropylene,EPDM,TPU,ABS,PET/PBT blends, concrete, wood, glass, metal and painted metal surfaces. IT is success replace : 3M K-500,3M K-520,3M 4298,,3M 94,3M4298
Typical Physical properties and Performance Characteristics
Note:
The following technical information and data should be considered representative or typical only and should not be used for specification purposes
S
olids: Approximately 5%-8%
Col or: clear light yellow
Flashpoint: -4°F(-20°C)
Net Weight: 780-800grams per liter
Viscosity: 40±5cps
Application Techniques
Surface preparation:
The bonding surface must be relatively clean and dry.Contaminated surfaces should be cleaned with a 50/50 Isopropyl Alcohol and water mixture,A clean lint-free cloth should be used.
Application
:Shake CNHYBOND 944 primer well before using:
Apply a thin uniform coating to the bonding surface using the minimum amount that will fully coat the surface, allow cnhybond 944 primer to dry thoroughly before applying tape. This is usually accomplished in 5 minutes at room temperature, Be sure the primed surface remains free from contaminants prior to applying the tape. Porous surfaces may require 2 application of CNHYBOND 944 primer for uniform coverage and good adhesion..
Allow first application of primer to dry before applying the second coat, CNHYBOND primer 944 may be applied with brush or swab, It can also be applied with a pressurized flow gun, knurled roller or other similar type of application equipment
Application Techniques
Surface preparation:
The bonding surface must be relatively clean and dry.Contaminated surfaces should be cleaned with a 50/50 Isopropyl Alcohol and water mixture,A clean lint-free cloth should be used.
Application
:Shake CNHYBOND 944 primer well before using:
Apply a thin uniform coating to the bonding surface using the minimum amount that will fully coat the surface, allow cnhybond 944 primer to dry thoroughly before applying tape. This is usually accomplished in 5 minutes at room temperature, Be sure the primed surface remains free from contaminants prior to applying the tape. Porous surfaces may require 2 application of CNHYBOND 944 primer for uniform coverage and good adhesion..
Allow first application of primer
to dry before applying the second coat, CNHYBOND primer 944 may be applied with brush or swab, It can also be applied with a pressurized flow gun, knurled roller or other similar type of application equipment
94% Sodium Tripolyphosphate tech grade
94% Sodium Tripolyphosphate tech grade
(1)good quality
(2)competetive price
(3)timely delivery
(4)excellent service.
94% Sodium Tripolyphosphate tech grade
Specification:
Na
5
P
3
O
10
,% ,Min.
94
P
2
O
5
,% ,Min.
57
Insolubles, % Max.
0.05
PH Value(1%Solution)
9.5-10.0
Iron (Fe), %, Max.
0.015
Fluoride (F), %, Max.
0.003
Chloride (Cl), %, Max.
0.025
Sulphate (as SO
4
), %, Max.
0.4
Bulk density, g/l
650-990
White degree %,Min.
93
Phase I
10-30
Packing:25kg plastic bags, 25MT per 20'FCL or as per buyers' requirement
Sodium Tripolyphosphate 94% STPP GENERAL INFORMATION
HS CODE
2835310000
CAS NO
7758-29-4
GRADE
national standard china
FORMULA
Na5P3O10
MOLECULAR WEIGHT
367 .86
94% Sodium Tripolyphosphate STPP PROPERTIES
Appearance
White powder
Melting Point
622°C
Boiling Point
1000°C
(1)good quality
(2)competetive price
(3)timely delivery
(4)excellent service.
94% Sodium Tripolyphosphate tech grade
Specification:
Na
5
P
3
O
10
,% ,Min.
94
P
2
O
5
,% ,Min.
57
Insolubles, % Max.
0.05
PH Value(1%Solution)
9.5-10.0
Iron (Fe), %, Max.
0.015
Fluoride (F), %, Max.
0.003
Chloride (Cl), %, Max.
0.025
Sulphate (as SO
4
), %, Max.
0.4
Bulk density, g/l
650-990
White degree %,Min.
93
Phase I
10-30
Packing:25kg plastic bags, 25MT per 20'FCL or as per buyers' requirement
Sodium Tripolyphosphate 94% STPP GENERAL INFORMATION
HS CODE
2835310000
CAS NO
7758-29-4
GRADE
national standard china
FORMULA
Na5P3O10
MOLECULAR WEIGHT
367 .86
94% Sodium Tripolyphosphate STPP PROPERTIES
Appearance
White powder
Melting Point
622°C
Boiling Point
1000°C
Polyaluminium chloride-04
polyaluminium chloride is a new high--efficiency unorganic polymer coagulating agent
Product perfomance
1,Become flocculant in high speed,big block, high activity and rapid sedimentation analysis.
2,It doesn't need other accessory ingredients and use less additional chenical
reabents than other unorganic coagulating agents and has lower cost for making water.
3,It has far--ranging PH value and strong dadptability and good effect for hithly turbid high--temperature organic contaminated water and lowly turbid low--temperature or ganic contaminated water.
PAC-04
Item
Al2O3 27.0%min
Basicity 80-95
Water insolvent 1.5% max
PH 3.5-5.0
N 0.01%max
As 0.0001%max
Cr6+ 0.0005%max
Hg 0.00001%max
Pb 0.0005%max
Cd 0.0001% max
Use:
for
domestic sewage and various kind industrial wastewater treatment.
Product perfomance
1,Become flocculant in high speed,big block, high activity and rapid sedimentation analysis.
2,It doesn't need other accessory ingredients and use less additional chenical
reabents than other unorganic coagulating agents and has lower cost for making water.
3,It has far--ranging PH value and strong dadptability and good effect for hithly turbid high--temperature organic contaminated water and lowly turbid low--temperature or ganic contaminated water.
PAC-04
Item
Al2O3 27.0%min
Basicity 80-95
Water insolvent 1.5% max
PH 3.5-5.0
N 0.01%max
As 0.0001%max
Cr6+ 0.0005%max
Hg 0.00001%max
Pb 0.0005%max
Cd 0.0001% max
Use:
for
domestic sewage and various kind industrial wastewater treatment.
pu resin (Anti-yellowing bright surface agent) chemicals for leather
pu resin LU-201G
1.have TEST REPROT. excellent transparency,
2.anti-yellowing,
3.Solid content: 19%
4.package:190kg/drum.
pu resin LU-201G(
Anti-yellowing bright surface agent
) chemicals for leather
n Appearance: semi-transparent liquid
n Solid content: 19±1%
n Viscosity: 200~600 CPS/25°C
n 100% module:
n Solvents: DMF/MEK/BAC/IPA
n Property:
excellent transparency
n Reference formulation:100 head to treat
n Caution notes:
Please store it in cool dry places with good ventilation.
1.have TEST REPROT. excellent transparency,
2.anti-yellowing,
3.Solid content: 19%
4.package:190kg/drum.
pu resin LU-201G(
Anti-yellowing bright surface agent
) chemicals for leather
n Appearance: semi-transparent liquid
n Solid content: 19±1%
n Viscosity: 200~600 CPS/25°C
n 100% module:
n Solvents: DMF/MEK/BAC/IPA
n Property:
excellent transparency
n Reference formulation:100 head to treat
n Caution notes:
Please store it in cool dry places with good ventilation.
Anti yellow agent
Anti yellow agent
1.Colorless,transparent liquid and odorless
2.ISO certified
3.Purity:100%
Anti yellow agent
1. Name of Commodity:
H202-A, Anti yellow agent
2.
Technical Indexes:
Appearance
Colorless, transparent liquid and odorless
Purity
100%
Viscosity(25
o
C)
20~30 mm
2
/s
Dioptre/n
25
D
1.390-1.410
Density/25
o
C
1.050-1.100g/cm3
Volatilization/105
o
,3H
≤0.8
PH
7
3. Properties & Applications
H202-A as anti yellow agent specially for silicone rubber, it has a good effect to prevent silicone rubber products from white become yellow when the second vulcanizing proceeds.
crude rubber mixed with carbon-white it called gross rubber(HTV rubber), as anti yellow agent it has a good effect according to this r ate, anti yellow agent : HTV rubber = 5:1000
4. Storage and Transportation:
Packing is 200L iron drum (net weight is 200kg/barrel),80drums/20’fcl .
It should be stored in shady, cool, dry and ventilated storehouse;
It should be kept away from fire and heat sources, the temperature in warehouse should be not exceed 30°C;
Package should be need airproof and avoid direct sunlight;
It should be put and stored far away oxidant, acid and edible chemical materials;
It should be adopt protection against explode at storage, don't use tool of producing spark easily;
It should be control packing speed when filling for fearing static;
Transportation: As non-hazardous chemicals;
Quality guarantee period: 12 months. Beyond the time, it still can be used only after the result of recheck is up to this standard.
.
1.Colorless,transparent liquid and odorless
2.ISO certified
3.Purity:100%
Anti yellow agent
1. Name of Commodity:
H202-A, Anti yellow agent
2.
Technical Indexes:
Appearance
Colorless, transparent liquid and odorless
Purity
100%
Viscosity(25
o
C)
20~30 mm
2
/s
Dioptre/n
25
D
1.390-1.410
Density/25
o
C
1.050-1.100g/cm3
Volatilization/105
o
,3H
≤0.8
PH
7
3. Properties & Applications
H202-A as anti yellow agent specially for silicone rubber, it has a good effect to prevent silicone rubber products from white become yellow when the second vulcanizing proceeds.
crude rubber mixed with carbon-white it called gross rubber(HTV rubber), as anti yellow agent it has a good effect according to this r ate, anti yellow agent : HTV rubber = 5:1000
4. Storage and Transportation:
Packing is 200L iron drum (net weight is 200kg/barrel),80drums/20’fcl .
It should be stored in shady, cool, dry and ventilated storehouse;
It should be kept away from fire and heat sources, the temperature in warehouse should be not exceed 30°C;
Package should be need airproof and avoid direct sunlight;
It should be put and stored far away oxidant, acid and edible chemical materials;
It should be adopt protection against explode at storage, don't use tool of producing spark easily;
It should be control packing speed when filling for fearing static;
Transportation: As non-hazardous chemicals;
Quality guarantee period: 12 months. Beyond the time, it still can be used only after the result of recheck is up to this standard.
.
0.38MM TRANSLUCENT FILM
High quality pvb film with reasonable price
PVB
is the abbreviation of Polyvinyl Butyral. PVB film is made from PVB resin and plasticizer. It is a non-toxic and smell-free soft sheet material with thickness between 0.2mm~2mm, the best material for the interlayer of safety glass. The process of PVB films is complicated andonly veral international companies just like Dupont(US), Solutia(US) and Sekisui (Japan) owned. Laminated glass not only has a good optical nature, but also resistant to penetration, ultraviolet etc. It is widely used in areas such as defense industry, Transportation architecture, etc.
Laminated glass
is a multifunctional glazing material that is manufactured by permanently bonding two or more pieces of glass with layers of Polyvinyl Butyral. (PVB) interlayer, under heat and pressure, to create a single construction . It not only has a good optical nature, but also resistant to penetration, ultraviolet etc, it is widely used in areas such as defense, industry, transportation construction etc.
Pvb film Specifications:
Thickness:
normal thickness 0.38mm, 0.76mm, 1.52mm. We can also offer other thickness pvb film as per customers' requirements.
Width (mm):
3210,2440, 2200, 2140, 2050, 1950, 1850mm, 1750, 1650, 1600, 1560, 1500, 1450, 1400, 1350, 1300, 1250, 1200, 1150, 1100, 1000, 900, 800, 700, 600, 460
Color:
Milk white, green, blue, grey and so on.
We get the ISO16949:2001certificate and the PCT quality certificate in Russia
PVB
is the abbreviation of Polyvinyl Butyral. PVB film is made from PVB resin and plasticizer. It is a non-toxic and smell-free soft sheet material with thickness between 0.2mm~2mm, the best material for the interlayer of safety glass. The process of PVB films is complicated andonly veral international companies just like Dupont(US), Solutia(US) and Sekisui (Japan) owned. Laminated glass not only has a good optical nature, but also resistant to penetration, ultraviolet etc. It is widely used in areas such as defense industry, Transportation architecture, etc.
Laminated glass
is a multifunctional glazing material that is manufactured by permanently bonding two or more pieces of glass with layers of Polyvinyl Butyral. (PVB) interlayer, under heat and pressure, to create a single construction . It not only has a good optical nature, but also resistant to penetration, ultraviolet etc, it is widely used in areas such as defense, industry, transportation construction etc.
Pvb film Specifications:
Thickness:
normal thickness 0.38mm, 0.76mm, 1.52mm. We can also offer other thickness pvb film as per customers' requirements.
Width (mm):
3210,2440, 2200, 2140, 2050, 1950, 1850mm, 1750, 1650, 1600, 1560, 1500, 1450, 1400, 1350, 1300, 1250, 1200, 1150, 1100, 1000, 900, 800, 700, 600, 460
Color:
Milk white, green, blue, grey and so on.
We get the ISO16949:2001certificate and the PCT quality certificate in Russia
pa vacuum bagging film
pa vacuum bagging film
1.resistant temperature 120 degree celsius;
2.soft and elastic,good elongation, gas-seal property.
pa vacuum bagging film
1.width:10mm-2400mm(e.g.:30mm,60mm,80mm,110mm);
2.thickness:25um-180um(e.g.:40um,50um,60um,80um);
3.length:at your request;
4.excellent tensile strength;
5.high thermal stability;
6.user-friendly operation;
7.good elongation,heat resistance and gas-seal property;
8.the film mainly used for thermoforming products;
9.We can produce the goods according to the customer's request.
This is a special nylon bagging film that is much softer and elastic so it can be layed up over extremely large parts and used with difficult contours.
There should be no problem with making difficult bagging procedures with ears
We have a large quantity of this material and ar e offering it at a very reasonable price.
Please call 86-0592-6288295-8006 for pricing quotes on multiple yards and/or roll pricing.
We strive for excellent customer service.
1.resistant temperature 120 degree celsius;
2.soft and elastic,good elongation, gas-seal property.
pa vacuum bagging film
1.width:10mm-2400mm(e.g.:30mm,60mm,80mm,110mm);
2.thickness:25um-180um(e.g.:40um,50um,60um,80um);
3.length:at your request;
4.excellent tensile strength;
5.high thermal stability;
6.user-friendly operation;
7.good elongation,heat resistance and gas-seal property;
8.the film mainly used for thermoforming products;
9.We can produce the goods according to the customer's request.
This is a special nylon bagging film that is much softer and elastic so it can be layed up over extremely large parts and used with difficult contours.
There should be no problem with making difficult bagging procedures with ears
We have a large quantity of this material and ar e offering it at a very reasonable price.
Please call 86-0592-6288295-8006 for pricing quotes on multiple yards and/or roll pricing.
We strive for excellent customer service.
Unsaturated Polyester resin
With phthalic anhydride and neopentyl glycol as the main raw material synthesis of unsaturated polyester resins
With phthalic anhydride and neopentyl glycol as the main raw material synthesis of unsaturated polyester resins, cross-linking agent containing MMA. Has medium viscosity and medium reactivity, with excellent water resistance, weather resistance and toughness, higher heat distortion temperature, strength and surface hardness. Particularly suitable for production of high quality artificial stone products
Performance of liquid resin
Appearance Transparent liquid
acid value 17-25 mgKOH/g GB/T 2895-1982
solid content 67-73 % GB/T 7193.3-1987
viscosity 25°C 0.90-1.50 Pa.s GB/T 7193.1-1987
stability80°C ≥24 h GB/T 7193.5-1987
Typical Curing Performance
25 °C water bath, 100g resi n add 1ml methyl ethyl ketone peroxide solution, and 1ml Co-ethylhexanoate solution
Gel Time 4.7-8.7 min GB/T 7193.6-1987
Packing and transportion
Packaging net weight 220KG drums. At 25 °C, storage period of six months. Avoid direct sunlight and stored away from heat. Open the package before use should be avoided.
KW-1025 is flammable and should stay away from open flame
Update Date:2011-8-10 1:43:57
With phthalic anhydride and neopentyl glycol as the main raw material synthesis of unsaturated polyester resins, cross-linking agent containing MMA. Has medium viscosity and medium reactivity, with excellent water resistance, weather resistance and toughness, higher heat distortion temperature, strength and surface hardness. Particularly suitable for production of high quality artificial stone products
Performance of liquid resin
Appearance Transparent liquid
acid value 17-25 mgKOH/g GB/T 2895-1982
solid content 67-73 % GB/T 7193.3-1987
viscosity 25°C 0.90-1.50 Pa.s GB/T 7193.1-1987
stability80°C ≥24 h GB/T 7193.5-1987
Typical Curing Performance
25 °C water bath, 100g resi n add 1ml methyl ethyl ketone peroxide solution, and 1ml Co-ethylhexanoate solution
Gel Time 4.7-8.7 min GB/T 7193.6-1987
Packing and transportion
Packaging net weight 220KG drums. At 25 °C, storage period of six months. Avoid direct sunlight and stored away from heat. Open the package before use should be avoided.
KW-1025 is flammable and should stay away from open flame
Update Date:2011-8-10 1:43:57
Subscribe to:
Comments (Atom)